Heat pipe pressure solar collector

heat pipe solar collector
1.Anti-frozen & pressurized system

2.Special high quality insulated material to reducing the heat loss rate

3.High quality heat pipe for efficient heat transferring and long life span of the solar water heater

4.Exquisite workmanship to guarantee the decent appearance

5.Can be used for the split pressurized solar system or solar energy project

6.Long life span and no extra cost after installation

heat pipe solar collector

1.The water is heated by the heat pipe rapidly.

2.There is no water in the vacuum tube ,so the tube will not break in the winter

3.It can be combined with the architecture perfectly

4.It can be combined with the existing

Technical information of heat pipe solar collector

Manifold :high quality red copper

Outer chest: Aluminium alloy with 2.0mm thickness

Frame: aluminum alloy with 1.5mm ///1.8mm thickness

Heat insulation layer: rock wool with 50mmthickness

Flowing passage : 1.2mm

Heat pipe holes: 0.8mm

Vacuum tube :58(47)mm/1800(1500)mm
Heat pipe tube coating: ALN/AIN-SS/CU

Specification of heat pipe solar collector

Model no:SDTJ-M

Working temperature:99 Celsius degree

Working pressure: 1.0Mpa(10Bar)

Vacuum tube : D58mm, L1800mm

Tube quantity: 15pcs.18pcs .20pcs. 24pcs .25pcs.30pcs.

Cold resistance:-30

Tube hail resistance:≤25mm
 

Package heat pipe solar collector

Standard carton box for the full container quantity.

Special wooden box for the sample order.

Certificate :CE ,ISO .SOLAR KEYMARK ,SRCC

working principle :

1) The operation of the solar collector is very simple.
2) Solar absorption: solar radiation is absorbed by the solar tubes and converted into heat.
3) Solar heat transfer: heat pipes conduct the heat from within the solar tube up to the header pipe
4) Solar energy storage: water is circulated through the header, via intermittent pump cycling.Each time the water circulates through the header, the temperatures is raised by 5-10C. Throughout the day, the water in the tank is gradually heated.