Accessories

Main technical data 1. Self power consumption:5W 2. Measuring accuracy of temperature:2 3. Temperature range of measurement:099 4. Maximum power of controlled pump:500W 5. Power of accompanied electrical heating wire:1500W 6. DC 12V, AC 220V or 110V Operation pressure of pressurized valve: 0.02Mpa0.8Mpa, s

Magnesium For Solar Heating Systems It can help the equipment of the solar heater system,such as the water tank, the evacuated tube etc. preventing water incrustation, melting silt and preventing erosion by lower cost.

Material: TU1 Starting speed: 30S Starting temperature: 25 Heat resistance: 0.02/W 1.ISO 9001 approved 2.OEM offer 3.Three-target evacuated tubes Heat Pipe tube Features: 1) High heat effectiveness: higher than all glass evacuated collector tube by 15% 2) heat pipes conduction: successfully prevents the defects of tube breakage and low power

Pressure-endure 1MPa Three-target vacuum tube(popular) performance and specification: Tube structure All-glass double deck co-axial structure Glass material High borosilicate 3.3 glass Tube length 47mmX1500mm,58mmX1800mm, 70mmX2000mm,70mmX2100mm etc

Tube structure All-glass double deck co-axial structure Glass material High borosilicate 3.3 glass Description: All glass evacuated tubes are the key component of solar collectors. The evacuated tube is similar to a conventional Dewar flask and consists of two borosilicate glass tubes, a glass with high chemical and thermal shock resistance. The ou

1.Time and system screen display 2.Temperature difference controlled circulation 3.Temperature controlled auxiliary heating 4.Temperature control of water tubes 5.Collector frost protection 6.Maximal tank temperature (protection of ank at high temperature) 7.Trouble display

Power: 1000W, 1500W Each type of Electric Heating can be installed with electric heating system electric heating Main Technical Parameter: 1.voltage and power according to your requirement. 2. various sizes of cross section, including 4.2*2.2mm, 4*2mm, 3.2*1.8mm, 4*4mm, 3.5*3.5mm, 3*3mm and other specificaitons 3.high watt density--25w/sq.cm, low

Automatically add water to main tank Specifications Assistant tank: 1.Good quality and good prices; 2. Beautiful in design; 3.OEM accept. Detailed Product Description Inner tank material: SUS304 stainless steel Outer tank: 0.5mm colored steel Insulation: polyurethane foam Automatic valve with stainless steel ball Capacity: 3, 5L

1. Can be operated completely automatic if connect with intelligent controller. 2. Simple structure, easy plug-in installation, can be installed both on flat and inclined roof, 3. Superior heat preservation ensured by one-off molding polyurethane foam with thickness 50 to 65mm. 4. Suitable for camping area, holiday residences. 5. stable and reliabl